Hi!
Just got myself a rev 3 turbo and I was loving it up to the point when the alternator belt snapped. I replaced it but had to undo the intercooler pipes to remove tension from the a.c. compressor belt to fit the alternator belt on.
However, put everything back together and started her up. Whilst it was idling I sprayed some carb cleaner into the Intake to clean some of the pipes up, However, took her for a spin and it just isn't boosting right. Boost won't kick in till around 4500/5000rpm, and even flooring it takes ages before eventually hitting the + on the boost dial. There's just no bottom end torque and its just sluggish as hell!
Any ideas what I messed up Did the carb cleaner foul something? Checked for codes and there aren't any. I went over everything I removed and made sure there are no leaks or splits.
Thanks!!!
[Mk2] [Turbo] Changed drive belt > Not boosting right!
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 2
- Joined: Mon Jun 26, 2017 6:04 pm
- Location: Manchester, UK
Re: [Mk2] [Turbo] Changed drive belt > Not boosting right!
If it was fine before, you've removed IC hoses and now it's got boost related issues, then it is most likely a boost leak from an incorrectly fitted or damaged IC hose.