[Mk2] [Turbo] Oil filter relocation kit

rossonza

Is there one? ive trawled ebay and found them for other cars. Just wondered if anyone had re-located the filter to allow easier changes.

Cheers
Ross.

Bear87 · Posted: Fri Jun 16, 2017 4:27 pm Post subject:

They are avalible but its a tight fit on the 3sgte. Some will fit and others wont. There is a few threads on here about people having success its probably worth trying the search box if you can figure out how it works [Brick wall]

I have a greddy one fitted but i dont know if prevous owner modified it to fit
_________________
Smoke me a kipper. I'll be back for breakfast.
1992 Rev 2 Turbo Super Red
1991 Rev 1 N/A Steel Mist Grey (daily)

kennym · Posted: Fri Jun 16, 2017 7:06 pm Post subject:

use google advance search for oil filter relocation but put imoc as the only website to search its much better.

ashley · Posted: Fri Jun 16, 2017 8:38 pm Post subject:

What revision engine do you have?

rossonza · Posted: Mon Jun 19, 2017 10:35 am Post subject:

ashley · Posted: Mon Jun 19, 2017 11:37 am Post subject:

I've just removed this from my 5S engine, which would be a bolt on for you:

- Mocal sandwich plate with side feed entrance/ exit take off plate (bolts onto block)
- 2 x AN10 fittings for take off plate
- 2 x AN10 stainless braided lines with straight hose ends one end, and 90 dgree fittings other end
- Mocal remote oil filter plate
- 2 x AN10 fittings for remote oil plate
- AN10 one way valve to prevent oil drain back from filter when engine off

You'd have to start using slightly larger diameter filters- the Camry v6 ones are a direct fit.

I've got some pictures of it installed, and can take some of all the fittings for you if you are interested...or I could give you all the part references if you want to replicate it yourself brand new Not sure what I'd ask for the kit, I'd need to look at what I paid...but it's an option for you.

[thumleft]

rossonza · Posted: Mon Jun 19, 2017 11:39 am Post subject:

markstevieandmads · Posted: Mon Jun 19, 2017 12:44 pm Post subject:

If i keep my rev 2 i might be after the same thing if you can post up part numbers.

ashley · Posted: Mon Jun 19, 2017 7:49 pm Post subject:

Cool beans, I'll put together a list tomorrow [thumleft]

ashley · Posted: Mon Jun 19, 2017 9:12 pm Post subject:

OK...shopping list:

Take off plate and top hat
http://www.jjcraceandrally.com/race/sandwich-plates/mocal-take-off-plate-for-3-4unf-male-tapped-1-2bsp-2

Compact remote oil filter plate
http://www.jjcraceandrally.com/race/sandwich-plates/mocal-compact-remote-filter-head

4 fittings
http://www.jjcraceandrally.com/race/sandwich-plates/mocal-sandwich-plate-and-filter-head-aluminium-adaprtors

4 dowty washers
http://www.jjcraceandrally.com/race/sandwich-plates/mocal-bonding-seals-for-sandwich-plates-and-remote-filter-heads

2 x 90 degree hose ends -10
http://www.speedflowshop.co.uk/-10-an-90-deg-hose-end-103-10-1758-p.asp

2 x Straight hose ends -10
http://www.speedflowshop.co.uk/-10-an-straight-hose-end-101-10-1740-p.asp

2m Braided hose -10 (might get away with 1 depending on where mounting)
http://www.speedflowshop.co.uk/stainless-steel-braided-hose-100-series-2433-p.asp

One way valve
https://www.merlinmotorsport.co.uk/p/goodridge-alloy-check-valve-with-10jic-threads-g-fcv-10

-10 female to female connector
http://www.speedflowshop.co.uk/-10-an-straight-female-adaptor---131-10-2165-p.asp

If my maths is correct- £422.33 excluding postage, including VAT...but you may find stuff cheaper by hunting around.

I'd be up for selling mine (hoses already made up) for significantly less than that...drop me a pm if interested [thumleft]