Rev3+ reverse light bulb change

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
muckyman
Posts: 473
Joined: Tue Sep 20, 2005 5:03 pm

Rev3+ reverse light bulb change

Post by muckyman »

Hello knowledgeable folk,
just spotted that one of my reverse light bulbs is out and hoped someone could advise on how to replace.
I've not had a look in the boot yet, but are these accessed from inside the boot or do the rear light clusters need to come out and then the centre panel comes off to gain access?
ta
Michael
auzzam
Posts: 218
Joined: Fri Oct 16, 2015 11:20 pm
Location: London

Re: Rev3+ reverse light bulb change

Post by auzzam »

From what I remember (although its been a while)...

I think you open the boot, then above the centre panel there should be two screws, you loosen these so the centre panel comes forward.

Once its out, you should be able just unscrew the bulb holder and switch the bulb.

Hope that helps

and just to be clear, the rear lights dont have to come off, the centre panel is independent.
muckyman
Posts: 473
Joined: Tue Sep 20, 2005 5:03 pm

Re: Rev3+ reverse light bulb change

Post by muckyman »

easy-peasy then :D
Many thanks!
tiff_lee
Posts: 384
Joined: Thu Jun 04, 2015 2:18 pm

Re: Rev3+ reverse light bulb change

Post by tiff_lee »

Just to add the lower part of the panel has two retainers that are just a push fit into a metal tab, should come out easy enough.
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”