Hi guys I can't seem to source any consistent information on this I hope you can help!
I have a 92 rev2 tubby and I only have 3 wires to my afm. Judging on the previous owners work I would fully believe he would have just cut a wire because he didn't know where it belongs!
Does anyone have a basic diagram showing wire colours and where the wiring goes too and from (incase I have to run new wires)?
Thanks chaps
[Mk2] [Turbo] AMF wiring
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] AMF wiring
Hi
I've never taken mine apart to check, but from this diagram it looks as though you should have more than two wires:
Hope that helps.
Paul
I've never taken mine apart to check, but from this diagram it looks as though you should have more than two wires:
Hope that helps.
Paul
Last edited by Pauln on Mon May 15, 2017 7:44 pm, edited 1 time in total.
Re: [Mk2] [Turbo] AMF wiring
Thanks Paul that's best wiring diagram I have seen!
I have 3 wires but it looks a bit iffy
I bought a new amf as mine was miles out of its test range but still having issues
I have 3 wires but it looks a bit iffy
I bought a new amf as mine was miles out of its test range but still having issues
Re: [Mk2] [Turbo] AMF wiring
so 1 missing then for some reason. Have you checked the adjustment of the screw on the top of the AFM body.
There should be a number stamped on the body near the screw. You simply add a one to this and that's the correct depth for the screw to be wound into for that particular AFM.
Eg. if the number is 49 the top of the screw should be 14.9mm below the top of the AFM body.
Paul
There should be a number stamped on the body near the screw. You simply add a one to this and that's the correct depth for the screw to be wound into for that particular AFM.
Eg. if the number is 49 the top of the screw should be 14.9mm below the top of the AFM body.
Paul
Re: [Mk2] [Turbo] AMF wiring
Yea I actually replaced my afm a while ago as tested miles out, new one made an improvement but seems to be one thing in a long long list of problems to work through
Cheers
Brad
Cheers
Brad