Help with this please
Doesn't happen all the time only now and then. When I stop at a junction or pull over the car starts bogging down and almost cuts out. Even with the clutch down.
Last time it happened I had been driving all day and stopped the car several times with no issues. It happened when I got home after a motorway journey.
During normal driving its perfect
I've read about turbos losing power during driving but mine is an na and it's never while driving only when I come to a halt. Searched but I've not come across this situation
Suggestions?
[Mk2] [NA] Almost cutting out when stopping
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 211
- Joined: Mon Apr 27, 2015 3:41 am
- Location: Glasgow
Re: [Mk2] [NA] Almost cutting out when stopping
What revision? Check for air leaks / vac leaks.
-
- Posts: 211
- Joined: Mon Apr 27, 2015 3:41 am
- Location: Glasgow
Re: [Mk2] [NA] Almost cutting out when stopping
Sorry Rev 4 1997
- Driftlimits Performance
- IMOC Affiliated Company
- Posts: 4928
- Joined: Tue Dec 14, 2004 9:33 am
- Location: 01442 601301
- Contact:
Re: [Mk2] [NA] Almost cutting out when stopping
Iscv+Tps need cleaning/calibrating.
-
- Posts: 211
- Joined: Mon Apr 27, 2015 3:41 am
- Location: Glasgow
Re: [Mk2] [NA] Almost cutting out when stopping
personally wouldnt touch the tps, but the idle control valve may be dirty, causing the flapper to not open on idle conditions. hence stalling.
worth a try anyways for a couple of hours of your time to remove and clean it.
worth a try anyways for a couple of hours of your time to remove and clean it.
Re: [Mk2] [NA] Almost cutting out when stopping
Worth checking the calibration of the TPS against BGB spec anyway, takes 5 minutes and is free to do. The TPS's can fail
- Driftlimits Performance
- IMOC Affiliated Company
- Posts: 4928
- Joined: Tue Dec 14, 2004 9:33 am
- Location: 01442 601301
- Contact:
Re: [Mk2] [NA] Almost cutting out when stopping
I don't think I've ever seen one fail! And if you've got it off the car and are doing the job properly,then of course check the tps!
Re: [Mk2] [NA] Almost cutting out when stopping
I have a failed one in my lockup! Seems to calibrate OK, but car just didn't run right with it on there. Is fine with another TPS.