Haha yes! It has been "entered" in the TSS since I bought it initially Iin 20v form, where it was strangely reliable.
Unfortunately for the last 3 years it has not been, fingers crossed this is its year!
Won'tbe able to make the Friday unfortunately
3SGTE sprint & Track mk1 build
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: 3SGTE sprint & Track mk1 build
What a fantastic return to sprinting for my mk1!
After a lot of engine, cooling and gearbox work over the last 2 years, it performed faultlessly at a waterlogged Snetterton!
My first 2 laps resulted in spins, trying to balance the throttle was tricky with the huge throttle body, but managed to get one clean lap in, placing 4th overall.
Had some great fun holding the slides later in the day too! Can't wait for Blyton. videos to come later!
After a lot of engine, cooling and gearbox work over the last 2 years, it performed faultlessly at a waterlogged Snetterton!
My first 2 laps resulted in spins, trying to balance the throttle was tricky with the huge throttle body, but managed to get one clean lap in, placing 4th overall.
Had some great fun holding the slides later in the day too! Can't wait for Blyton. videos to come later!
-
- Posts: 7068
- Joined: Mon Feb 11, 2008 5:47 pm
Re: 3SGTE sprint & Track mk1 build
was great to see you, car looked awesome out on track..
MR2 Sprint zombie outbreak response vehicle
https://www.facebook.com/pages/Zombie-S ... 0272127049
https://www.youtube.com/channel/UCNBrEd ... s-qbox0FwQ
https://www.facebook.com/pages/Zombie-S ... 0272127049
https://www.youtube.com/channel/UCNBrEd ... s-qbox0FwQ
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: 3SGTE sprint & Track mk1 build
Cheers Pete, it's always a good catch up! Gutted to hear about your mothership
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: 3SGTE sprint & Track mk1 build
a couple of videos :
my fastest lap :
https://www.youtube.com/watch?v=x0L3Dd8QnNM
this was my last lap, the circuit was soaked, so not the quickest, but certainly fun :
https://www.youtube.com/watch?v=cLm6sCdnXnI
my fastest lap :
https://www.youtube.com/watch?v=x0L3Dd8QnNM
this was my last lap, the circuit was soaked, so not the quickest, but certainly fun :
https://www.youtube.com/watch?v=cLm6sCdnXnI
-
- Posts: 5494
- Joined: Mon May 16, 2005 8:40 pm
- Location: Wickford, Essex
Re: 3SGTE sprint & Track mk1 build
Neil_turbo wrote:What a fantastic return to sprinting for my mk1!
After a lot of engine, cooling and gearbox work over the last 2 years, it performed faultlessly at a waterlogged Snetterton!
My first 2 laps resulted in spins, trying to balance the throttle was tricky with the huge throttle body, but managed to get one clean lap in, placing 4th overall.
Had some great fun holding the slides later in the day too! Can't wait for Blyton. videos to come later!
Ahhh Neil you're car looks epic and I've just made a mess in my pants!
Would those skirts look right if I didn't have the arches?
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: 3SGTE sprint & Track mk1 build
Thank you
I find it tends to divide opinion
The brear bumper and skirts are rip offs of the EBN kit, which Toni has on hers without arch flares...
(I actually bought the spoiler off Toni, so that is genuine)
The front bumper i got with the kit was very different to the EBN one, and i modified it quite a bit as well, so the way i have it may look odd without the arches though
I find it tends to divide opinion
The brear bumper and skirts are rip offs of the EBN kit, which Toni has on hers without arch flares...
(I actually bought the spoiler off Toni, so that is genuine)
The front bumper i got with the kit was very different to the EBN one, and i modified it quite a bit as well, so the way i have it may look odd without the arches though
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: 3SGTE sprint & Track mk1 build
the car is currently not well again with more engine problems
I intend to get it fixed one last time, and then have very sadly, after 8 years building this car, decided it will be for sale
I will do a "for sale advert" after the car is fixed, but if anybody wants to discuss anything during this, do let me know.
Neil
I intend to get it fixed one last time, and then have very sadly, after 8 years building this car, decided it will be for sale
I will do a "for sale advert" after the car is fixed, but if anybody wants to discuss anything during this, do let me know.
Neil
-
- Posts: 5494
- Joined: Mon May 16, 2005 8:40 pm
- Location: Wickford, Essex
Re: 3SGTE sprint & Track mk1 build
Any idea what the rear mesh is called? As I think I have this piece in my garage.
Re: 3SGTE sprint & Track mk1 build
Shame its not worked out for you mate. As you have invested lots of time and effort on this car. Are you having cooling issues?
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: 3SGTE sprint & Track mk1 build
The rear mesh was just some folded bumper mesh with the metal panel behind cut out!
Car is currently in storage. Engine is rebuilt and mapped, but just needs a couple of days tweaking a few bits on the coolant pipe routing. Unfortunately I have neither time, enthusiasm or cash at the moment!
Car is currently in storage. Engine is rebuilt and mapped, but just needs a couple of days tweaking a few bits on the coolant pipe routing. Unfortunately I have neither time, enthusiasm or cash at the moment!
-
- Posts: 5494
- Joined: Mon May 16, 2005 8:40 pm
- Location: Wickford, Essex
Re: 3SGTE sprint & Track mk1 build
ahhh
I think I have an official part of a bodykit for that actual section. Rumoured to be part of the erebuni kit...
I think I have an official part of a bodykit for that actual section. Rumoured to be part of the erebuni kit...
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: 3SGTE sprint & Track mk1 build
Get some pictures up