Hi, I've managed to source a gearbox speed sensor however the previous owner has lopped off the plug that connects to it.
Does anyone know which order the wires are supposed to be in on the sensor?
[Mk2] [Turbo] Speed sensor wiring.
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] Speed sensor wiring.
Surely at least one person would like to crawl under their car and take a look?
Re: [Mk2] [Turbo] Speed sensor wiring.
I'll see if i can crawl under my car this evening. I might forget though i've got ton's on.
Re: [Mk2] [Turbo] Speed sensor wiring.
Pin 1 - IG+ (12V) Black/Yellow wire
Pin 2 - Sensor earth Brown wire
Pin 3 - Signal Violet wire
Looking at the connector on the loom with the key way bottom right
Pin 1 | Pin 2 | Pin 3
Looking at the connector on the gearbox with the key way bottom left
Pin3 | Pin 2 | Pin 1
Hope it helps!
Pin 2 - Sensor earth Brown wire
Pin 3 - Signal Violet wire
Looking at the connector on the loom with the key way bottom right
Pin 1 | Pin 2 | Pin 3
Looking at the connector on the gearbox with the key way bottom left
Pin3 | Pin 2 | Pin 1
Hope it helps!
Re: [Mk2] [Turbo] Speed sensor wiring.
Just what I needed, thanks.
Re: [Mk2] [Turbo] Speed sensor wiring.
That was basically what I was going to put. I didn't forget or anything..