Hello everybody,
Following Peter Gidden's advice, I'm looking to get a Toad Ai606 installed in my 2 following a failure of the OEM alarm. I'm looking for a recommendation and price idea in terms of an installer? I want someone cheap, but obviously not at the cost of a decent job! I'll want all old alarm gubbins removed, and the new alarm installed alongside the window open/close module for one of the extra buttons and a sidelights on/off for the other? I believe that's something they can program? It's a UK Mk2 Rev5 NA, and I'm in Kingston upon Thames if that makes a difference?
Thanks in advance!
[Mk2] [NA] Toad Ai606 installer
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 355
- Joined: Thu Aug 22, 2013 9:00 am
- Location: Kingston upon Thames, London
- Peter Gidden
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: [Mk2] [NA] Toad Ai606 installer
If you want Thatcham Cat1 certification, you'll need to find an approved installer. Give Toad a call for a local guy.
http://hornetcaralarms.co.uk/about.html
http://hornetcaralarms.co.uk/about.html
-
- Posts: 355
- Joined: Thu Aug 22, 2013 9:00 am
- Location: Kingston upon Thames, London
Re: [Mk2] [NA] Toad Ai606 installer
I was trying to do exactly that, but can't find a number for Toad themselves - just "approved installers". Equally, this thread was designed in the hope that someone knows an approved person that does a good job cheaply? Any recommendations?
- Peter Gidden
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: [Mk2] [NA] Toad Ai606 installer
TheLepresean wrote:I was trying to do exactly that, but can't find a number for Toad themselves
http://http://toadalarm.com/
-
- Posts: 355
- Joined: Thu Aug 22, 2013 9:00 am
- Location: Kingston upon Thames, London
Re: [Mk2] [NA] Toad Ai606 installer
I've rang that number, it goes through to Gap Security - an approved installer, not Toad themselves!
- wilkie senior
- IMOC Moderator
- Posts: 2057
- Joined: Tue Feb 01, 2011 8:53 pm
- Location: Barnoldswick
Re: [Mk2] [NA] Toad Ai606 installer
Maybe It's like ADT you can only contact approved installers, rather than ADT themselves?
That's a negative, Jim. I do not have the measles.
Hail Cosmos Eagle Rev 5, 1998 -
RIP White Eagle Rev 1, 1991 - 2016
-
- Posts: 355
- Joined: Thu Aug 22, 2013 9:00 am
- Location: Kingston upon Thames, London
Re: [Mk2] [NA] Toad Ai606 installer
Perhaps
The question still remains, does anyone know any installers/have any recommendations?
The question still remains, does anyone know any installers/have any recommendations?
Re: [Mk2] [NA] Toad Ai606 installer
yell.com seem to have quite a few in your area that list car security/alarms you may have to do some old fashioned ringing around, alarm installation also tends to be a sideline of car audio shops so try any that are local aswell
-
- Posts: 355
- Joined: Thu Aug 22, 2013 9:00 am
- Location: Kingston upon Thames, London
Re: [Mk2] [NA] Toad Ai606 installer
Ah thanks, might just have to try that. For now, I have a rear bumper to get repaired after someone very kindly hit my car in a car park and neglected to leave a note!! Gutting seeing as I only had it professionally repainted 3 weeks ago...