[Mk2] [Turbo] [mk2] [turbo] mine's ecu

psycho · Joined: 02 Aug 2009 Posts: 16 Feedback Score: 0

hello (excuse my poor english)

I would like to read the data on the daughter board in my mine's ecu.

the data may be crypted but the daughter board is connect with the toyota ecu so

I can connect the rom in a eprom programmer, i'll have data but i must have the mine's software to extract the different map

can i use OpenECU / ECUFlash?

I give you some links:

http://forums2.freshalloy.com/showthread.php?p=1630738

http://wiki.xtronics.com/index.php/EFI_ECU_FAQ

the must:

http://www.mr2.com/forums/stand-alone-ems/Toyota-MR2-24931-blitz-acess-ecu-computer.html

what's the right program??? I send a message at luke

djpkins · Posted: Mon Sep 28, 2009 6:52 am Post subject:

I wouls be very interested to see what you find out as I am running a Mines ecu also...good luck [thumleft]

psycho · Joined: 02 Aug 2009 Posts: 16 Feedback Score: 0

I hope have help!

psycho · Joined: 02 Aug 2009 Posts: 16 Feedback Score: 0

A friend think the data are on the daughter board and on the ecu toyota!

any idea?

Mike N · Posted: Wed Sep 30, 2009 10:06 pm Post subject: chips with everything!

DATA is written on the EPROM Chip which is soldered into the piggyback board.

The ECU container has the year and production date on the side.

Send this info to Mines in Japan they will tell you the EPROM values.

PS - they take their time answering.

psycho · Joined: 02 Aug 2009 Posts: 16 Feedback Score: 0

i find a good topic!!!

http://forums.twobrutal.com/showthread.php?t=15236