Author Message
Edwin
PostPosted: Wed Mar 16, 2005 12:50 pm    Post subject:
ENSMR2 wrote:
The Phoenix Power is no longer produced. I didnt know they stopped the apexi though. Im sure I can get hold of it from somewhere that may have them in stock.

We'll see.


Keep me informed mate, I may join you [Smile]
woody
PostPosted: Wed Mar 16, 2005 10:52 am    Post subject:
ENSMR2 wrote:
woody wrote:
just trying to be helpful [d'oh!]

ARC intercooler delivered for £823


Sorry didn't meen to be rude [Embarassed]

I've not heard much about that one. Never come up in my research. Alway have seen in my research the PP and Apexi ones being rated as the best.


thats o.k. mate. it doesn't help when i post a link that dont work [Wink]

good luck with the search
ENSMR2
PostPosted: Wed Mar 16, 2005 9:50 am    Post subject:
The Phoenix Power is no longer produced. I didnt know they stopped the apexi though. Im sure I can get hold of it from somewhere that may have them in stock.

We'll see.
Edwin
PostPosted: Wed Mar 16, 2005 9:03 am    Post subject:
I got this off the MR2OC board:

"gregulator, i was actually gonna compare the apexi with the phoenix thats why i wanted a pic

I know the core design is the same but what about the area of the ic core on the apexi vs the phoenix?

As apexi ic is no longer produced in japan i need to find a good alternativ and the phoenix power seems to be it if its not smaller."

I've read this more than once. It seems Apexi no longer manufactures the GT spec intercooler for the MR2?
ENSMR2
PostPosted: Wed Mar 16, 2005 8:11 am    Post subject:
woody wrote:
just trying to be helpful [d'oh!]

ARC intercooler delivered for £823


Sorry didn't meen to be rude [Embarassed]

I've not heard much about that one. Never come up in my research. Alway have seen in my research the PP and Apexi ones being rated as the best.
woody
PostPosted: Tue Mar 15, 2005 3:42 pm    Post subject:
just trying to be helpful [d'oh!]

ARC intercooler delivered for £823
ENSMR2
PostPosted: Tue Mar 15, 2005 2:36 pm    Post subject:
Cant see much on there. Can't be bothered to register either.

I've done too much research to start up on another one. Apexi GT spec and thats it. Now to get the £££'s together before they stop doing that one too!
woody
PostPosted: Tue Mar 15, 2005 1:55 pm    Post subject:
http://www.nengun.com/catalogue/product/77

just found this.. the price doesnt seem too bad. the 100f is the mr2 version acording to the compatibility chart at the bottom.
Bry
PostPosted: Tue Mar 15, 2005 12:40 pm    Post subject:
ENSMR2 wrote:
Bry wrote:
Apexi as the pipe work lets the Spearco down [Sad]


Thanks Bry. All this research and I've come full circle back to the Apexi.


[Laughing] [Laughing] [Laughing]
ENSMR2
PostPosted: Tue Mar 15, 2005 12:29 pm    Post subject:
Bry wrote:
Apexi as the pipe work lets the Spearco down [Sad]


Thanks Bry. All this research and I've come full circle back to the Apexi.
woody
PostPosted: Tue Mar 15, 2005 12:07 pm    Post subject:
what are the ARC intercoolers like?? are they any good?
Bry
PostPosted: Tue Mar 15, 2005 11:51 am    Post subject:
ENSMR2 wrote:
So what do you reckon then? Apexi (same core as the PP) or Spearco?


Apexi as the pipe work lets the Spearco down [Sad]
ENSMR2
PostPosted: Tue Mar 15, 2005 11:31 am    Post subject:
So what do you reckon then? Apexi (same core as the PP) or Spearco?
Bry
PostPosted: Mon Mar 14, 2005 6:25 pm    Post subject: Re: Please Confirm
stevecordiner wrote:
Bry wrote:


The other i/c in the pic is a Greddy (it's my Pheonix power i/c in the pic)
The spearco I/c is Definately not as big as the Pheonix power i/c


The spearco absolutely dwarfs a greddy IC. Maybe I looked at the wrong picture but the one of the PP and the greddy they looked kind of similar sized - or was a looking at the wrong pic?


Pheonix power i/c is slightly bigger than the spearco not buy much though [Smile]
ENSMR2
PostPosted: Mon Mar 14, 2005 4:28 pm    Post subject:
Phoenix Power on't do the intercooler any more [Crying or Very sad]

I guess I'm gonna have to go for the apexi. May consider getting the end tanks made up myself along with a bigger hard pipe kit.
ENSMR2
PostPosted: Mon Mar 07, 2005 11:58 am    Post subject:
Maybe its only a bit bigger than the spearco?

At least its been confirmed now. I can part with the cash happily...in a way.
stevecordiner
PostPosted: Mon Mar 07, 2005 11:39 am    Post subject: Re: Please Confirm
Bry wrote:


The other i/c in the pic is a Greddy (it's my Pheonix power i/c in the pic)
The spearco I/c is Definately not as big as the Pheonix power i/c


The spearco absolutely dwarfs a greddy IC. Maybe I looked at the wrong picture but the one of the PP and the greddy they looked kind of similar sized - or was a looking at the wrong pic?
ENSMR2
PostPosted: Mon Mar 07, 2005 10:41 am    Post subject:
No idea. Still waiting for a reply from MTTE. All I've got so far is a automated message saying they've recieved my enquiry and will contact me shortly.

I'm guesing around £800 - £900. The apexi which is almost the same bar the end tanks being smaller is around £750.

I'll reply here when I find out.
Edwin
PostPosted: Mon Mar 07, 2005 8:14 am    Post subject:
ENSMR2 wrote:
I'll be getting the phoenix power one then. [Very Happy]


Where will you be getting it from? And what do they cost?
ENSMR2
PostPosted: Mon Mar 07, 2005 8:08 am    Post subject:
Cheers Bry,

I was waiting for a response from you after I re read Johns post.

I'll be getting the phoenix power one then. [Very Happy]

Powered by phpBB © 2001,2002 phpBB Group

Page generation time: 0.4885s (PHP: 88% - SQL: 12%) - SQL queries: 22