Changing dissy and rotor arm!! |
Description should be the same on all mk2's (i think) Author jimGTS Date Fri May 20, 2005 3:18 pm Type Picture How-To Category Engine Views 6969 |
remove 4plugs around dissy cap, using the clips "only", dont go pulling the plugs by the leads!! (mark leads with tape like me!) best to use a flat blade screwdriver to undo the clips!!
unclip the coil as well. use 10mm rachet for 2 bolts around the cap. take cap off. unscrew 2 screws holding cap on, remember what position the old one was in, and replace with new! put dissy on, do up 2 bolts, put in plugs and coil, away you go!! |
User comments | |||
|
|||
|
|||
|
|||