Changing dissy and rotor arm!!

Description should be the same on all mk2's (i think) Author jimGTS Date Fri May 20, 2005 3:18 pm Type Picture How-To Category Engine Views 6969

remove 4plugs around dissy cap, using the clips "only", dont go pulling the plugs by the leads!! (mark leads with tape like me!) best to use a flat blade screwdriver to undo the clips!! unclip the coil as well. use 10mm rachet for 2 bolts around the cap. take cap off. unscrew 2 screws holding cap on, remember what position the old one was in, and replace with new! put dissy on, do up 2 bolts, put in plugs and coil, away you go!!

User comments

JohnnyC: Sat May 21, 2005 4:59 pm     Excellent how-to =D> Not wanting to sound pedantic though, you need an 8mm rachet for the 2 bolts that hold the cap on, not 10mm, at least on a UK rev5 NA.

ANDY FINDLAY: Fri Dec 23, 2005 1:25 pm     nice one jim i used 8mm on my bolts i have a rev2 turbo dont use a screwdriver trying to get the nuts out they thread easy as i found out !

jimGTS: Sat Dec 24, 2005 12:41 pm     my mistake, obviously i must have used 8mm to get the cap off....

Powered by Knowledge Base, wGEric © 2002 PHPBB.com MOD
This script (Knowledge Base - MX Addon v. 1.03e) is modified by Haplo